Quote:
Originally Posted by TGM_OFFROAD
It bolts right up but spins in the opposite direction. You will need to take the motor apart and spin the center body 180 degrees.
|
But you don't need to pull the end caps off, is that right TGM? Just loosen the bolts a little bit and spin the center body. I took the whole thing apart - pulled the end caps off and the winding out - and then it was very hard to get the brushes back in place.
Jeff
__________________
'18 GG XC 300
'05 GG DE 300
'01 GG txt 321
Last edited by farmerj; 10-03-2019 at 11:21 PM.
|