Thread: Rekluse 3.0 EXP setup (2011 EC 300)
View Single Post
  #1  
Old 08-09-2018, 11:02 AM
kdxkid kdxkid is offline
Member
  
Join Date: Mar 2014
Posts: 59
Default Rekluse 3.0 EXP setup (2011 EC 300)
Hello,

Any advice on what spring combo to run in the Core EXP 3.0?

Also, any advice on running CR frictions? They are a bit thicker (around 3 mm) - I am not sure if I can use 7 of these, or if that will be too thick.
Reply With Quote