Thank you so much for the info and advice. Your explanation of the mid valve stack and it's float made it where even I could understand the concept. It takes me a while to grasp how some things work but once I do it's like an "ah ha!" moment.
So, what I'm thinking for what I currently have...
piston
11 x .3
11 x .3
18 x .1
20 x .1
24 x .1
13.8 x .1
31.8 x .15
31.8 x .15
28 x .1
2.5 spacer
...and going to...
piston
11 x .3
11 x .3
13.8 x .1
18 x .1
20 x .1
28 x .1
31.8 x .15
31.8 x .15
24 x .1
2.5 spacer
...then, if needed, I can play with the float by removing the 11 x .10 from it's stack or maybe moving it between the two 20 x .10 shims.
Does it sound like any of this might work? I think I'm about at that point I might have to send it to LTR or ZipTy. I wonder if either sells stacks so I don't have to ship my forks?
|