All the bearings are std caged needle roller bearings you can buy at any bearing shop. The bushings are gasgas specific, part numbers are in the parts list. There is a mix of o-rings and traditional seals.
I will check and come back with the numbers later today.
I had no problems sourcing any of the parts last time I rebuilt the rear end, one year ago. I will do it again in a few weeks, but have not bought any parts yet.
Sent fra min YAL-L21 via Tapatalk
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|