Bike year & model = 2011 EC300 Race
Temperature (degC) =15-20
Elevation = Sea level
Main jet = 180
Pilot jet =38
Needle & notch =N1EG / #2
Air screw setting =2
Throttle valve/slide =#7
Keihin PWK 38
I like the power delivery of the N1EF but it's too rich off idle. Got the N1EG and there was an improvement but had to go down on the pilot jet (previous 40). Good transition off idle into middle range and soft hit when WOT. Still a bit tricky to idle but a bit better than before. Air screw still bares almost no influence on idle, might have to go down again on the pilot jet.
Tried the N3CJ #3, MJ180, PJ40 but too much of a hit when WOT.
__________________
Vindicator
'11 EC 300R
Last edited by Vindicator; 06-06-2012 at 11:48 AM.
|