My Geko brake pedal is slap worn out from all the mud riding this past "winter".
I went ahead and put the 2008 YZF 450 brake pedal on my bike.
Went really easy. The YZF pedal is nice and solid. No slop at at all.
I cut the GG brake pedal spacer to work with the YZF pedal-I used the short piece. This allows the YZF pedal pivot bolt to fit in the GG frame.
The pedal sticks out too far from the side cover.
I lightly heated up the pedal and bent it to where I liked the position.
My clevis is worn out and the threads stripped out. So I went with the YZF clevis. The threads are the same as the GG.
