Rich-Lean fueling EC300 '08?
I've had lots of great help with jetting for this bike I bought recently - was fouling plugs and obviously rich. I got an NECW needle installed - it's now running strong down low but still a bit rich - air screws 2.5 turns out to idle. Starts easily. I also found the PJ was blocked. I'm going to try a 40 PJ - currently 42. When it gets to 1/3 - 1/2 throttle it's now starting to get a ticking noise - I'm thinking it's lean in the middle and pinging? Should I raise the needle and see if it goes away? Currently on Middle pos.
|