Quote:
Originally Posted by eralha
Hi guys just to let you know, my friend decided based on dealer recommendation that he will go with a C vertex piston, i saw on the vertex faq that the minimum clearance is 0.05mm so it should be fine.
Cheers.
|
He will probably get better cylinder compression if he get it measured right... The precise answer for your first question is to get the cylinder measured and go with the biggest piston that attends minimum clearance. Service manual says minimum piston play for the 300 is 0.06 mm. The play at assembly of the piston is determined by subtracting the smallest cylinder diameter from the largest piston diameter.