View Single Post
  #5  
Old 08-08-2019, 07:00 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 170
Default

The easiest way to check the steel plates for direction is to let them drop down the splines in an empty basket. They should drop straight down but will hang up if the splines have been cut in such a way as to be directional.

The 1st KTM I ever had had terrible clutch drag from new and this was the issue. They had been thrown in at the factory and most had been put in the wrong way round.
Reply With Quote