View Single Post
  #26  
Old 08-28-2014, 04:26 AM
@enrico@ @enrico@ is offline
Member
 
Join Date: Aug 2014
Location: Italy
Posts: 23
Default

HI guys, I'm a new Italian Gasgasser
I've got a 2013 ec 300.
Just a problem: white plug with 40pj N1EF SECOND CLIP 175mj

After slow riding the plug is black and wet but after 300 m fast uphill become white and dry.

The bike runs good but in the long fast uphills there is some lose in power or little bogs ( I'm not sure about the last term ).

The bike was brand new but the mechanic set the float before deliver it to me.

Yesterday I checked the float level and I found between 8 and 10 mm so I hope I found the trouble.

It's more difficult to adjust the float in new PWK vs Mikuni tmx because the pin is so close to the tab the I can't see exactly when the contactoccur.

I hope I have lowered the float up to about 7.5 mm.
The bike does not pay gasoline up to high inclination, do not understand how others do to say that pours on the stand.

If not fix the problem I'll try a 185 mj....

Other ideas?

Thank's
Reply With Quote