I had a similar problem on my 06 200 a few years ago. Turned out to be a bad ground connection at the ignition coil.
The coil is grounded to the frame via the screws. Remove the coil and make sure you have bare metal where the threaded clip sits on the frame tab. On my frame it was quite rusty.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|