Jetting advice
I read every page of the jetting thread and I'm still scratching my head.Here is what I have in the bike now.
2007 EC 250
N1eg Needle
3rd clip from top
180 main
42 pilot
#8 slide
Racing an enduro 800-1000 ft temps so they claim 52* but race will start in the 40* and may stay that cold all day .This is the set up I run all summer plug is perfect and bike runs perfect.Would I be safe going with a 185 main and a 48 pilot there are some 6th gear fields and would rather not melt it down but don't want to be to rich just in case it does warm up.thanks Mike
Last edited by Silver; 10-28-2009 at 09:22 AM.
|