View Single Post
  #14  
Old 01-26-2017, 12:11 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

I am going back checking the install to see anything is incorrect.

This is how the mainshaft and countershaft were assembled. The two top bags include the two stock mainshaft gears. The three bottom bags include the three countershaft gears(the IMS gear and the stock gear are to the left of the bottom left bag, these are the ones that we are having a difficulty.)

All these bags include the removed stock Honda gears, each bag is labeled with number of teeth for the Honda gear, then , at the bottom middle of the bags you will see the label. (replacement IMS gear with the number of teeth.)

So this shows exactly which gears were removed , how many teeth they had, and how many teeth were on each IMS replacement gear that replaced them. I counted the teeth on each stock gear, then I counted the teeth on each IMS gear as I replaced them and labeled each bag. If anybody sees a problem, please let me know because I am scratching my head on this one.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:19 AM.
Reply With Quote