Good thinking!
Had been looking at modifying the existing piston or making something along the lines of a gold valve after reading the ports are very restrictive.
Found a problem stripped the other leg....
base valve came apart as i buzzed it out, dunno if buzzing it out caused the screw holding the stack to come out or not but i had to go fishing to find the screw spring and check plate.
Additionally the stack is missing a load of shims on the HS.
Stack is
23x1 x10
11x2
22x1 x4
21x1
12x1
its missing 20,19,18,17,16,15,14,13,12 shims and they arent inside the fork
