Bike year & model = 2013 300R/E
Temperature (degF) =70
Elevation (feet) =200
Main jet = 175
Pilot jet =42
Needle & notch =NECW #2
Air screw setting =1.5
Throttle valve:7
Results:Changed the PJ to a 42 as I was 1 or thereabouts turns out on the AS.Idle kept hanging with the 40.Put in the 42 and it needed a bit more out on the AS and was a bit rich.So, I dropped the needle to #2 ( from 3).
Admittedly I only rode round the block a few times ( sorry Stanmore-ians) but it felt good.Very smooth.
Oh JG's top tip: if you havent got a air compressor, a bike pump with a presta valve attachment is perfect for blowing air through the PJ!
|