Quote:
Originally Posted by ricknaz
What info does the technoresearch software give you about the sensors. If the temp sensor is faulty it could be too lean on cold startup. Does it start easier when it's hot? Try starting it with the temp sensor disconnected and see if it makes any difference.
|
Where is the temp sensor located exactly? I have ran through all the tests that the technoresearch software has and they all PASS.
I was able to get it started yesterday fairly quickly with hitting the e-start button slowly and only holding for about 2-3 seconds max until it started. Opened throttle a little bit too. I did have the fuel trim set to 65 which standard for my bike was set at 22. Maybe that has helped? I ran it and it ran pretty good...
Thanks
Crankin04