Quote:
Originally Posted by Jakobi
I'm betting the tape you've used to link the two cables together are jagging on the guide behind the light as the suspension compresses. It might not do it every time, but it only has to catch every now and then to jag the cables out of shape. Tape them down lower and then tape them up higher above the headlight and let the guide do its job in the middle.
|
I can see your point, but this happened before I put the tape on it. I didn't use zipties up high for the very reason that you stated, but after the cable got bent I started experimenting with various ways to route the WD cable, and the latest thing I did was tape it. At this point it is bent so bad that even if I straighten the cable a little it won't take much to bend it again. I think a new brake line is in order, but I don't want the same thing to happen again.