Quote:
Originally Posted by swazi_matt
the tool looks a bit more substantial than the baja no-pinch tool
where the aluminium tends to bend
|
I presume the Baja tool is a copy of the original TMT. Yes, TMT is very substantial and is a nice part of the TMT4 kit. The complete TMT4 setup impresses me, although I started out with the TMT "pushing rod" alone at first. After a year using that, I bought the complete adjustable TMT4 frame with the foot-operated lever that controls the arm that pushes the tire up and / or down from the rim's edge.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Last edited by Anders; 02-10-2017 at 01:41 AM.
Reason: Removed links in quote
|