See paste below from Jakobi...
Paste this in your other thread :P
No dramas with the grinder. Grind the face plate until you're down to the pins and use a punch to drive them out. If its on the bike best to work around the rear sprocket as it'll hold the chain for you. If doing it to set the new chain length remember the age old, measure thrice. Cut once!
__________________
2001 GG EC250, 2001 GG EC200
1980 KDX 175, 2002 KDX 220, 1979 KZ 1300 Vroom Vroom
Some day a brand new bike... some day...
|