[pbspecial]

I have a 2003 EC 250 (actually I think it's the DE model) that I bought new last year. Anyway, used to be a strong A enduro rider, but moved to GA from MI and haven't done much riding the past year until recently. My son is now riding a KTM 50 so we are going to a few tracks and trails. Anyway, I noticed that the bike is leaking some black goo out of the breather hose that comes off the left side of the power vavle. It's been a while since I have serviced one of these (probably 6 years ago on my 1998 model) I run Motul 8002T at 50:1 And the bike is jetted pretty clean. I changed jetting per Jim Cook recommendation at Smackover before they went OOB. I think it's a 178 main, N1Eg needle in #2, and a 42 pilot, that's from memory, but it runs well and does not drip anything off the silencer, only some splatter on the fender.. A few questions -

1. Why is it leaking out of this tube, my 98 did not seem to do this
2. How often should I service the PV? This bike probably has only about 6"Play rides" A and 4 enduro's on it. Purchased new in April 2005.
3. Where do I find a good set of instructions to perform this maint.? I didn't see anything in the owners manual.

Thanks for the help.

PB

P.S. If anyone lives in the greater Atlanta area (I live in Cumming, GA) and needs or wants to show a newbie in the area where to ride, I am looking for some ridin buddies. I'd like to run some enduros in the SETRA series, but need some people to tag along with as well. I have vehicle and trailer and willing to dirve. I rode the Cherokee Nat'l last year, but that is it. I have been now riding MX tracks and the trails out at Durhamtown but that's getting old. - need some single track....HELP.....