Quote:
Originally Posted by Neil E.
2011, small button = rain, large button = sun.
|
Thank you so much for confirming that!
Quote:
Originally Posted by barossi73
If the NEDW gets you close keep in mind that NECW is a half clip leaner.
So NECW clip#3 is in between NEDW #2/#3.
In my (limited)opinion these needles (NED #2/NEC#3) work pretty well 0degC to 35degC 70%humidity 0-3000ft.(New Zealand)'13 200
You look a little colder,humidity? Prob start with NED #3
The bottom is smooth and progressive/stepped rather than on/off up onto the pipe,good mid to top.Hope it works for you in your conditions!!
|
I'm having 2nd thoughts about the NEDW. I know a lot of people are saying it's smooth, but I've seen it reported several times that it runs lean lower in the throttle position, and isn't really anything exceptional regarding low end torque. I'm not so convinced yet that it'll be better from the CEK I've got now.
I'm now considering just trying to tune the CEK. Overall, everything works pretty well other than the assumed lean condition at mid throttle. Raise the CEK needle a clip, which should just add a set amount more fuel across the mid-throttle range, without changing off-idle or WFO, and see how it does.