Quote:
Originally Posted by tonipurhonen
Anyone have any ideas for basic clicker settings for the 07 sachs and öhlins shock.
And how about 07 Marzocchi fork.
|
I don't have my '07 EC250 yet, so I can't confirm this first hand but...
I believe the '07 Marzocchi fork are also 45mm. I would try the '06 settings that Les mentioned above. Same theory may apply to the '07 Ohlins shock.
For the '07 Sachs shock:
The GG manual mentions the following standard settings:
Rebound = 25 clicks out (counterclockwise from fully closed). There's 40 clicks total adjustment.
Compression = 1.5 turns out (counterclockwise from fully closed). There's 4 turns total adjustment.
Spring rate = 5.2 (EC250/300), 5.0 (EC125/200), 5.6 (MC)
From what I have read on GMP's posts:
Spring preload = 8-10mm (from no preload on spring adjuster)
Rider sag = 110-115mm