Quote:
Originally Posted by motopsycho87
So the clutch has 8 friction plates, and 7 steels...
Standard GG clutch
(2.85*8)+(1.5*7) = 33.3, where did 28.95 come from?
CR250R clutch
(3*8)+(1.5*7) = 34.5, where did 30 come from?
So 34.5-33.3 = 1.2, so if the spacer is originally 3mm, it should be reduced to 1.8, cool... BUT!
|
I have the same measurements.
BUT it sounds good on paper for me.
In fact, according to calculations, everything should work out.
In reality, i made spacer 1.5 mm, BUT nut pressed the hub so much, that it became one with the basket, and there can be no talk of clutch work. It looks like I need a 1.7mm spacer, BUT will the clutch pack fit?