View Single Post
  #3  
Old 12-19-2007, 06:18 PM
JRDoz JRDoz is offline
Senior Member
 
Join Date: Feb 2007
Location: Sydney,Australia
Posts: 209
Default

Quote:
Originally Posted by TripleThreatMotorsports View Post
there should also be a adjustment in addition to bleeding it, also make sure your slave cylinder is not bypassing and not holding pressure, .
Like it was mentioned, make sure your lever adjustment is backed off fully.
Bleed from the bottom to the top with a hose and syringe. That is the only way to be sure you get all the air out....
__________________

"It's Nature that Brings out the Madness"
GasGas FSR450 07'
Reply With Quote