Quote:
Originally Posted by pizzaman
just bought a 06 300ec and i need to get the old bearings out. i took off the covers and i m having a tough time because of the spacer . any help would be greatly appreciated  |
The spacer just floats between the bearings. It only has a little foam ring on it from the factory to keep it in the approx right spot. You should be able to use a small dowel, or something that won't scratch it up to shove it over a little bit so you can get a punch on the edge of the bearing it to tap it out. Perhaps the bearings are squeezed together a bit too tight, but the spacer will move.