Quote:
Originally Posted by gasIdaho
I'm getting around to setting up the suspension on my 05' EC300. I've seen/heard two schools of thought regarding the Sag measurements.
The first is take the meas. with the bike on the stand (suspension unloaded) and then take the meas. while on the bike in normal stance on the footpegs. Take the difference, etc.
The second is to take the meas. with the bike upright but on the ground(suspension loaded) and then take the second meas. while on the bike in normal stance on the footpegs. Any advice out there??
thx/Mike
'05 EC300
|
Both are correct & both needed.
There is a measurement for static sag - just the bike weight and one for rider sag with you on it. When they and the preload are within bounds you have it setup correctly.
For example and I'm making the numbers up because I can't remember.
Static = 35 mm
Rider = 105 mm
Preload between 2-10mm
Preload being the reduction in spring free length from the adjusting rings only with bike on a stand.