If I put smaller pilot jet I will need less air.. so air screw will be closed more... Am I right?? I have found out, that my engine does not shut down if I turn AS fully in... that would mean I am still lean.. so I need bigger pilot jet... but maybe it is lean because my needle on the leanest position and idle screw turn in just so much, it is letting more air in, but no more fuel... and maybe ma sticking idle is not really sticking idle because of lean condition, but it is lowered idle because of rich mixture... I will try to change pilot jet to 42 and try to turn idle screw out to make it idle just with pilot jet and airscrew set properly and not by lifting the slide...
Last edited by Mr.freezer; 08-17-2018 at 01:01 PM.
|