Quote:
Originally Posted by Jakobi
Just checked the fiche.
SETTING WASHER 22.4X36X0.7 Part T4022036 x 6
2 for the shackle that bolts to the frame (rocker arm supports to rocker arm)
2 for the front dogbone/connecting rod (rocker arm to dogbone)
2 for the back dogbone/connecting rod (dogbone to swingarm)
There are 2 smaller washers that are used for the rocker arm to lower shock mount. These are SETTING WASHER 21X10.2X1
|
Ok, I put washers on either end of the dog bones, the two i missed belong to the swingarm.....I'm guessing the washers go on the inside of the swingarm? In between the swingarm and the engine case....