Just for your info,
The N3CW at pos 2 is significantly (up to 20%) leaner than the N1EF#3. Thats a pretty big jump to take, and you might have been happier starting in clip 3 or 4 and then leaning off to find your ideal setting. The N3xx also has a fat tip as you know, and requires a size or 2 larger on the main than you'd use with the N1EF.
For the idle and air screw, you need to back the idle adjustment screw down before the air screw will come into action. I found with the stock N1EF and a 42 that the slide was lifted quite a bit using the idle screw (turned in until the spring was fully compressed).
|