As F5 said. Too soft can be read as a spike/harsh feeling as well.
How much oil are you running in the outers at the moment?
Given that the change has been a move in the right direction, I'd be inclined to drop a 13 clamp on the base valve and see how it feels. (You could throw a 12 clamp on one leg, and the damping will average across the two, if you didn't want to wait on shims or pull 2 legs down again).
Aim to have the clickers in the middle. A few clicks each side of 13 seems to be the sweet spot.
It sounds like you like a bit more free bleed as you tend to have the clickers open. You might like a touch more float with no changes to the base valve, but I personally wouldn't go this route at this stage. Try as above and see if you like it.
|