The piston is stuck. I drained the coolant, it was very clean and the rads were full, no oil and no leaks. Rads look good too. Tonight I am going to remove the head and put some Kano Aerokroil Penetrating Oil in the intake and exhaust ports and the piston. I looked at the piston through the exhaust port, it looks good,no damage, just a dusting of a small amount of rust.
Here is what I am finding on most of the bike, there is a mixture of red clay and rust on the exposed bolts but the inner parts of the bolts look new.
I am going to cover the ports and clean the whole bike.