My fork static sag is 38mm with 63mm rider sag.
Shock is 38mm static sag and 111mm rider sag.
My Sachs shock LS Comp was screwed all out.
I set the clickers according to the Sticky I found on in this forum.
First I set the shock HS Comp to 1.5 turns out from closed. For reference there are a total of 4 turns of adjustment.
Then I set the LS Comp screw to 12 clicks out (24 clicks total).
I set the Rebound to 15 clicks out (42 clicks total).
On the 45mm Marzocchi Shiver forks I set the Compression to 16 clicks out and rebound to 12 clicks out.
Adjusting the clickers showed me that they all work although some of the clickers make a bit of grinding noise and the shock HS Comp dial is very stiff and hard to turn.
I need to change the oil, clean and inspect the forks and shock before I ride it again to assess the suspension performance.
Depending on what I see inside I might build a tapered midvalve stack in the forks.
|