[hamilton]

Try this, first make sure your rear sag is correct. I like mine at 100mm. Set comp at 15 clicks out (top) rebound 15 clicks out (bottom) set pfp preload all the way out. Find a good test loop same terrain over and over. go four clicks out rebound better or worse? If better go two more and so on. if not go the other direction. Do the same for comp. I found the magic in the rebound setting. When they both work well find some faster whoops and add preload to the pfp 1/4 turn at a time, check o-ring on fork tube you should be using all the travel. Add preload until your using all but the last inch of travel. Only one change at a time. Hope this helps, good luck.