Quote:
Originally Posted by H.D
Hello ian is your problem solved with the starter cluth?And wat parts dit you replace i,am curious because i think i have the same problem on my 450 fse 2005 . please let me now
Helmut
|
Yes fine now. All it needed was a new set of tiny bolts that connect the starter clutch to flywheel, they had sheared off. They must be as strong as possible. I used M6 x 16 High Tensile 12.9 which were the strongest I could find. DO NOT use the torque setting in the manual - it's beyond the yield point! Check on Google for M16 12.9 steel max torque. The ones I found had higher heads than the ones that were on there so I had to measure the clearance.