Hope you get her singing soon!
I had a little play again today.. As I seem to do almost every other week.. Its a good excuse to ride around the yard while furthering my understanding of the different jets, needles, diameters etc. Swapped out the N3CJ#2 for a N3CH#2. Only slightly richer on the diameter of teh straight section. Then had to drop the pilot from a 42 to a 40. Could probably go to a 38 tbh. Very minor change but has made the bike feel a bit stronger/torquier in the lower revs.
My personal opinon is that the 40P and W diameter needle provide the best balance for this bike with the #7 slide. Easy starting, good power, little to no smoke or spooge. Unfortunately I don't have an N3CW to run in clip 2. EW#2 is a bit too rich at 1/4 throttle, N3EW#1 rips nuts but is too close to the line for comfort. I am running an S3 head with the high high compression insert though so thats something else to take into consideration.
Post some vids when you get her going right! Would love to see what WA has to offer.
|