View Single Post
  #33  
Old 10-26-2018, 05:25 AM
Chesterspal Chesterspal is offline
Member
 
Join Date: Oct 2018
Location: Connecticut
Posts: 14
Default

Cleaned my chain down to the bare metal in my degreaser tank, reinstalled and coated with Honda chain lube.

Had issues with the clutch not fully releasing. Doing a bleed made no difference although there was air in the line. Turns out the pressure spring in the clutch slave was missing and it was worn inside the cylinder to the point it was leaking hydraulic fluid into the bike and mixing with the transmission oil.

Ordered a complete new cylinder to replace it. Jim Snell is a great resource for these older parts and for his knowledge of the machine.

Getting there bit by bit.
Reply With Quote