So a few days ago I made an 8 gauge cable to go between the starter solenoid and starter. I then used the old cable as an earth between the coil and starter bracket. I rubbed back the paint on the starter bracket surface prior to fitment.
The starter is now working hot or cold. Sometimes still need a double press but always works on the second press. Starts within a second or two. Starts in gear when warm.
Mods so far,
Gasgas upgraded + from battery to solenoid and - from battery to engine case as per dealer fitment.
Replaced solenoid to starter with 8 gauge and used the old one as en earth between starter bracket and coil.
220cca Skyrich/SSB battery.
|