[Avoided_asphalt]

Bit of an update about 9 months later (slowly getting there !)

Fork seals are same as 1996 KTMs which also used the Magnum 45mm forks (but see below)

Fork bushings for 99 and 2000 EC models, thats the teflon coated ones, are available from GasGas motos in the UK -

part number BE25714134 "Botella" (The bush in the bottom part of the fork)

part number BE25714134 "Barra" (The bush in the upper part of the fork thats bolted into your triple clamps or "yokes") [Yokes is a UK only word I think]

I don't know what the "Italian ?" words mean, inner and outer I guess.

I checked out the 2000 model parts list and these bushings are the same for '99 and '00 bikes. My forks are from a 99 Gas Gas EC 200 (but forks fitted to an 02 EC 300).

Just trying to sort some new fork springs and we're ready to go

FWIW - By mistake I bought the Innteck bushings part numbers SKTE45M and SKTI45M but these don't fit, are for earlier model Marzocchis such as a 1996 KTM 250/300/360 SX

Worth tracking these parts down as these forks are really good when set up right IMHO