Take the cover off. Mates one had worn an oval where the bevel gear ran.
Bored a hole and fitted a sleeve from bearing shop.
He then drilled a small hole and fitted a breather tube. Glued up the drain hole and put a few cc of trans oil in cover so it was always lubed.
I think he used a generic ktm starter but reversed polarity. Should be info to do that somewhere.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
|