Help! Just installed a new Trail Tech X-2 headlight on my 1997 EC250.. It worked great for about 15 seconds then all my lights stopped working. No running lights, no brake lights and no headlights. I happened to be monitoring the voltage input to my Trail Tech Voyager at the time and saw a spike of about 19 volts but then it went back to a normal input voltage. I think I may have had a short around the voltage regulator. I think I found the short where the wires coming out of the stator connect to the bike's wiring harness. Found two connectors melted together.
Before I get too far into this I thought I would ask if any of you have experience with this...
also I have 3 wires coming out of my stator, 2 yellows and a red. One of the yellows was cut and left unattached by the previous owner is that a problem? Thanks.
DM
