My VDST experience is on a Ducati with an idle air control stepper (no user mechanical idle speed/throttle angle control). If the FSE is like this then yes, you are correct and done. If the bike has a screw adjustment for throttle angle/idle speed, then its quite possible that this will have to be backed off completely or set within a range of degrees on the VDST display before the reference is taken (TPS reset). My Cannondale was like this. Too bad VDST doesn't display the current TPS reference like the Optimum Cannondale software did.
Sorry I have no specific '04 FSE experience, I hope someone here with an FSE can comment.
|