View Single Post
  #8  
Old 05-26-2008, 08:32 AM
Eric K Eric K is offline
Senior Member
 
Join Date: Jul 2006
Posts: 546
Default

Try bleeding the clutch by opening the bleed screw on the slave cylinder and pulling the clutch lever in and holding it in. Close the bleed screw. Release the clutch lever. Repeat until you don't see any air bubbles.

The air seems to accumulate at the top of the slave cylinder.
__________________
Eric K
'06 GasGas EC300
'01 GasGas XC300
Reply With Quote