I've decided I'm going to go with the head stop mounted tang style one. I will make a program and cut it on the wire cutter tomorrow at work, and then grind down what is required after fitment.
Separate point. Using 20x42x12mm bearings, I'm measuring 22mm disc side and 18mm to get the wheel centered. This is measuring the difference from the fork leg to the side of the rim. Sound about right?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear
2016 RM-Z450
|