Hi chaps, thanks for the input, spent the day trying to find the offender.
Stripped carb again just to double check that, seemed ok.
Pulled reeds out, seem perfect.
Pulled exhaust and both PV covers to inspect and something weird it going on with the PV. It?s not stuck, but with full travel from the governor, it?s only moving about 2mm, meaning that?s its ultimately open all the time. I haven?t managed to tear down any further yet to find out what?s going on but something is a miss.
With the actuator taken off, I can rotate the PV manually until it is fully closed, however, when it?s in the closed position, the shaft is 180 degrees out of where it needs to be in order to fit the shape of the actuator arm.
|