2018 EC300 Front and Rear Stock settings
So seeing as everyone else is lazy and hasn't pulled their forks and shocks apart for my own curiosity I had to do it myself!
KYB Front forks
Compression base valve:
11x0.3 (3)
20x1.7 (base plate)
14x0.3 (6)
16x0.11
18x0.11
20x0.11
22x0.11
24x0.11
26x0.11
28x0.11
30x0.11
32x0.11
21x0.11
32x0.11 (11)
Piston
Check valve
Spring
Collar
Nut
Mid valve: Compression
Stepped washer
8x0.2
Collar
Spring
17x0.3
15x0.3
11x0.3
12x0.11
14x0.11
16x0.11
18x0.11
20x0.11 (4)
Piston (had the usual bleed hole forgot to measure it)
20x0.11 (3)
12x0.11
18x0.11
16x0.11
14x0.11
12x0.11
11x0.11
16x1.5 (base plate)
Nut
(Float was 0.7mm in the above stacks)
KYB Rear Shock:
Compression:
22x0.3
24x0.3
26x0.3
28x0.3
30x0.3
32x0.3
34x0.3
36x0.3
38x0.3
28x0.11
32x0.11
40x0.2 (10)
Rebound:
36x0.2 (7)
28x0.11
36x0.3
34x0.3
32x0.3
30x0.3
28x0.3
26x0.3
25x0.3
24x0.3
23x0.3
26x0.4
Hope this helps some one! I stiffened up the rebound damping on both the shock and forks and softened the compression in the base valve as I was most of the way out on the clickers and mostly in on the rebound. I added a 5.8kg/mm rear spring and some 0.46kg/mm springs up front. Not massive changes as it is pretty good out the box!
New settings:
KYB Front forks
Compression base valve:
11x0.3 (3)
20x1.7 (base plate)
14x0.3 (4) <removed 1
12x0.12 <added this
14x0.3 <moved here from above
16x0.11
18x0.11
20x0.11
22x0.11
24x0.11
26x0.11
28x0.11
30x0.11
32x0.11
21x0.11
32x0.11 (11)
Piston
Check valve
Spring
Collar
Nut
Mid valve: Compression
Stepped washer
8x0.2
Collar
Spring
17x0.3
15x0.3
11x0.3
12x0.11
14x0.11
16x0.11
18x0.11
20x0.11 (4)
Piston (had the usual bleed hole forgot to measure it)
20x0.11 (3)
14x0.11 <this replaced the 12x0.12
18x0.11
16x0.11
14x0.11
12x0.11
11x0.11
16x1.5 (base plate)
Nut
(Float was 0.7mm in the above stacks)
KYB Rear Shock:
Compression:
22x0.3
24x0.3
26x0.3
28x0.3
30x0.3
32x0.3
34x0.3
36x0.3
38x0.3
28x0.11
32x0.11
40x0.2 (10)
Rebound:
36x0.2 (7)
28x0.11
36x0.3
34x0.3
32x0.3
30x0.3
28x0.3
26x0.3
25x0.3
24x0.3
removed the 23x0.3 here
26x0.4
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Last edited by Gasser Nate; 10-23-2019 at 02:23 AM.
|