As the spacer is 2mm thick that is quite a workable size for a steel tube.you could make it just under 28 and a tight fit 20 and press it onto the axle against the closed end and make it stop 1/2 way into the far spacer so the floating fully works.
That is if the closed end is 28 or bigger which surely it is.
Bugger that would have been much easier- and reversable.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
|