Hello!
So, after reading a lot in the forum, testing with the bike and see how it feels, jetting is like this.
AS2 carburetor
Needle & notch =NECW #2
Main jet = 172
Pilot jet = 42
Air screw setting = 2 1/4
Throttle valve:7
Fuel: 95 oct (can use 98 if better for jetting)
Oil:MOTOREX CROSS POWER 2T at 1.5%
Elevation: Sea level to 500m
Temp C?: Summer 20 to 35 / Winter 0 to 15
Riding type: Hard enduro single track and rocky creeks.
I had problems with fouling plugs, just the usual with gasgas factory settings
so i had to deal with it. Adjust float level, clean the air filter, carb, pipe and muffler. After all that, changed stock needle
Bike goes a lot better, smooth but with power, starts easy even after a crash (before had to try several times) and fuel consumption has improved a lot!!
I just started with jetting, so if the jetting gurus see that any setting is wrong or could be a bit better please tell me!!
Thanks
Edit: Been using 98 oct from the local pump and plug have a better color!!