So I have my float height properly set. 170 main, NEDW 3rd clip and 42 pilot.
Only gone on one ride since this set up and bike feels great, I am getting closer, and only a small dribble of Spooge. I just checked my spark plug. It?s the same one I?ve had since previous jetting settings. The ride I went on was some pretty tight stuff with no openings. I was in mainly 1st and 2nd the whole time. Looking at my plug the electrode is a dark brown, the ground electrode is a dark brown, the insulator is tan with a tiny spot of dark brown and the flat surface of the threads is gold. On the top right of the picture there is a spot on that surface that is darker and had a bit of a crust. I?m not sure where this crust would come from. Anything that stands out that this plug would indicate? Thanks!
|