Thread: 02 300 tranny
View Single Post
  #3  
Old 09-29-2010, 06:23 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Sticking shift scorpion, not uncommon, will cause a no shift condition. I always remove the shaft on a new bike and check/deburr the parts as they are stampings. Locking up is something else and very rare. The early bikes used a plain bearing trans design but even those were generally good. The trans itself is very sturdy, I've had a few apart including a high hour 125 and all looked new.
Reply With Quote