Quote:
Originally Posted by GGRider01
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I've bought two of these. Complete set, everything you need. Not the toughest gaskets, so be careful. Use a very small amount of RTV to keep them stuck in place for assembly. As far as seals go, I would get measurements and start looking for alternative sources.
|
Sage advice on the RTV. It was necessary, as each of the two dowels were in opposite sides of the cases, which makes keeping the gasket in place a little tricky. I kept the RTV near the motor mounts and away from where the cases need to seal.